Concrete basement floors can benefit a lot from finishing stain. At the first glance, you will find that staining you basement concrete floor is something that you can do very easily. However, once you get into it, you will find this is a job that should be done by a professional painting contractor.
Staining your concrete basement floor will make it look great and protect it as well. You should stain the concrete basement floor on a warm and dry day. If not possible, you need to keep a dehumidifier handy to prevent moisture from running your stain job.
Mentioned below are the steps you need to follow when staining your concrete basement floors:
You need to apply citrus degreaser to a tiny party of your basement floor with your scrub brush. Wait 30 minutes to let the degreaser set on the floor. Once it is done, you need to mop the area where you applied the degreaser. You can then apply a good floor polisher onto the area and scrub it. Continue to apply degreaser as well as the floor polisher to the entire basement floor. For better result, you can also cover the walls, and baseboards (if any).
You need to use a vacuum cleaner to remove the excess water from the concrete basement floor. This will also help you remove the sealer from the floor. Once you are done, mop the entire floor. In order to be sure that the sealer has been removed, you can drip water on the floor. If it beads, it is clear that sealer is still there on the floor. Allow maximum time to dry the floor, depending on the humidity of the floor or damp in the air in the basement area.
As mentioned earlier, staining basement floor is a difficult task and it should be done by a professional contractor. In order to stain your basement in your Andover, MA house, consider hiring a reputed painting company in Andover MA.
Once the pre work is done, you are now ready to apply the stain to each corner as well as the edges of your basement. First, you can start with a paintbrush, and then take a roller to apply stain on the rest of the basement floor. Once you have applied stain on the entire floor, allow it to dry for 4-5 hours before applying the second coat of stain.